PropSpeed - 200ml Kit

PropSpeed 200 ml Kit

With an ultra-slick topcoat, Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat- ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.

Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal. In short, if a reaction can't occur, there will be no corrosion!

The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.

Coverage Guide:

• 1x Propeller - 33-60cm, or 12-24" in size.
  
• Surface - The Propspeed 200ml Kit will coat a surface of approximately 0.7m² / 7.5ft².
  

• Etching Primer Base, 96ML
  
• Etching Primer Hardener, 24ML
  
• Clear Coat - 80ml Clear Coat, a non-toxic, silicone topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.
  
• Mixing stick
  
• PropClean Wipes - The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with a wipe to make your job easier
  
• PropPrep Wipes - Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with a wipe to make your job easier
  

MSRP

$273.11

U/M

/ KT

Price

$232.14

Core

Part Number

RPS200

Manufacturer

PROPSPEED USA INC

Brand

ETA

Quantity Available

Quantity On Order