Digital Oil Pressure Gauges with Alarm
4-Digit LCD Display
The OP60 Oil Pressure Gauge displays engine oil pressure in PSI or Bars. It has built-in calibration curves for most popular pressure senders - (no sender is provided.) The sender type is easily selected with the front panel keys.
Low and High pressure alarms can be set over the entire range of the instrument/sender. When activated, the built-in 85dB alarm will sound and the display will flash. The alarms can be enabled or disabled with a single key press. Five levels of backlighting can be selected and all set-up, calibrations constants, alarm values, and sender type is saved to non-volatile memory. Data is output on an NMEA 0183 compatible serial data output.
Specifications:
Operating voltage - 9.5 to 33.0 VDC
Current drain - 0.018 amps nominal
Operating temperature from 32 to 1220 F. (0 - 500 C.)
Five levels of backlighting, including OFF
Oil Pressure data display as 0 to 300 PSI or 0 to 20 Bars
Built-in calibration curves input for all popular senders from Teleflex, VDO, GM, Stewart-Warner, Faria, etc.
Data output as NMEA 0183 serial 4800 BAUD
Built-in 85dB audible alarm with settable high and low oil pressure alarms The NMEA 0183 serial output pin can be user programmed as an external alarm output terminal
This monitor is supplied in a waterproof case with choice of round or square face.
Case size - 2.5" width x 4.1" depth (61 x 104mm)
Mounting hole - 2-1/8" (55mm) diameter
CE certified