My Account My Cart
San Diego Marine Exchange

Questions? Contact us today

San Diego Marine Exchange
Oberdorfer Model 209M Macerator Pump - 9 GPM - 12 VDC

Oberdorfer Model 209M Macerator Pump - 9 GPM - 12 VDC

SKU: 40010

$792.20 / EA


Model 209M Close-Coupled Rubber Impeller Pump

Bronze Macerator with DC Motor Drive - 12-Volt (A92)

This self-priming macerator pump unit will handle sewage, waste, toilet paper, cigarettes, cigars and all solids which can be macerated that are of approximately 1-inch size. It will not handle fruit pits, hard plastic utensils, prophylactics, cloth or fabric sanitary napkins.

These pumps utilize Buna-N impellers that can handle oil-contaminated water and kerosene at reduced impeller service life. Liquids that are compatible with Neoprene can be pumped, including fresh and saltwater solutions and mild chemicals. Do not pump severe solvents or acids, and whenever possible, flush pump with fresh water after usage.

A 30-gallon holding tank can be emptied in less than 4 minutes using large diameter (3/4") garden hose. These pumps self-prime up to 4 feet, with discharge up to 20 feet uphill or up to 50 feet away. (Use large diameter garden hose for best results.)

Suction lift of 15 feet is possible when pump remains primed (2.5 feet when suction line is empty). Suction lines must be airtight in order for pump to self prime. A foot valve at beginning of suction line is recommended.


Features:


  • All bronze construction
  • Large vent openings separate pump and motor
  • High-torque motor
  • Stainless steel motor shaft
  • Motor shaft slinger protects motor bearings
  • Rubber motor grommets for noise isolation
  • New impeller compound eliminates seizing
  • Easy replacement of macerator wheel and impeller
  • Removable base
  • TECF (totally-enclosed, fan-cooled) motors

Specifications:

  • Pumps 9 gallons/minute at 2 PSI
  • Maximum pressure at 12 PSI
  • 12 VDC motor draws 18 amps
  • A92/A94 motors - 1/10 HP, 2600 RPM
  • Inlet - 2" slip-on hose section or 1-1/2" NPT
  • Outlet - 3/4" external garden hose thread and 3/8" internal NPT
  • Intermittent duty cycle - Do not run pump dry
  • Self priming up to 4 feet
  • Temperature limit for bronze pumps is 212° F
  • PH-range for bronze pumps is from 4 to 11

Genuine Oberdorfer repair and service parts kit for this pump is also available and sold separately - (Sku# 40388)

MSRP
$932.00
U/M
/ EA
Price
$792.20
Part Number
209M-A92
Manufacturer
Web Oberdorfer
Quantity Available
1
Quantity On Order
OberdorferLogo