Digital Hydraulic Pressure Gauges
4-Digit LCD Display
With a press of the button you can view hydraulic pressure up to 10,000 PSI in 16 ranges.
The HY60 is a digital gauge that works with 4-20 mA hydraulic pressure senders and displays hydraulic pressure in PSI or Bars. It has built-in calibration curves for most popular 4-20 mA hydraulic pressure senders manufactured by Ashcroft, Omega, Midas, Gems, and others (sender not provided). The sender maximum pressure is easily selected from 30 to 10,000 PSI in 16 steps with the front panel keys. Low and High pressure alarms can be set over the entire range of the instrument/sender. When activated, the built-in 85dB alarm will sound and the display will flash. The alarms can be enabled or disabled with a single key press.
The HY60 outputs NMEA 0183 compatible serial data on a screw terminal at the rear of the instrument. This ASCII information can be used to log performance or repeat the display information at a remote location on the CruzPro RP30 and/or RP110 data repeaters. If NMEA 0183 serial data is not required, then the output terminal can be programmed as an external alarm output pin.
All constants and calibrations are pre-set during manufacture but user may alter these settings to suit any particular needs. Calibrations can be altered over a wide range using the front-panel switches. All information is automatically saved to non-volatile memory.
The HY60 draws only 0.018 amps, works on both 12V and 24V system with 5 levels of backlight (including OFF) that can be selected for night-time viewing from the front panel. All set-up, calibration constants and alarm values are saved to non-volatile memory.
Click on the product thumbnails below for more details