3" Flex-Mount Ventilation Blower
High-Output DC Blowers - 1000 Hour Motor Life
This DC blower for high-volume air intake or extraction are designed for engine rooms or
fuel compartments. They also work well for galleys, bilges, accommodation and head
compartments.
The flex-mount blower is of a radial design that produces the highest output in more
complex installations with longer ducting lengths and/or multiple bends in the ducting.
Flex-mount blowers have both inlet and outlet ports designed for slip-on flexible duct
connections. It is ideal when an inline installation is preferred or the most convenient
routing is needed for a confined space. The blower may be rotated in the mounting bracket to orient the discharge port in any direction to allow for the shortest ducting lengths.
Jabsco DC blowers are designed to remove fumes from the engine compartments of gasoline- powered boats prior to start-up and therefore conform to ISO 8846 MARINE and USCG Regulations for ignition protection. Note: AC models are NOT ignition protected.
Features:
- Flex-mounting for 3600 adjustable outlet
- Tough reinforced-plastic housing
- Mount to any surface
- Slip-On inlet and outlet ducting connection
- Efficient high-volume air flow
- Low current draw
- Dimensionally stable, quiet-running Delrin0 rotors
- Corrosion-resistant material construction
- N.M.M.A. type accepted
- Meets USCG Regulation 183.410
- Complies with ISO 8846 MARINE for Ignition Protection
- Complies with ISO 9097 MARINE for Electric Fans
- Conforms with EN 50081-1 for Suppression of Electromagnetic
Interference
- CE approved
Mfg No. 35515-0010
Duct Size 3" (75mm)
Maximum Output 105 CFM (2.9m3/min)
ISO 11105 Rated Compartment Size 0-75 Cubic Ft (0 - 2m3)
Dimensions (Length x Width x Height) 6-3/4" x 5" x 5-1/2" (17 x 13 x 14mm)
Voltage / Fuse Size 12 VDC 6 Amp
Note: This standard-duty Jabsco blower is primarily
intended for intermittent-duty cycles such as evacuating fuel vapors from bilge areas - 15 minutes maximum. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.
Only the heavy-duty blowers are designed for continuous-duty operation in commercial or
heavy use applications.
Note also: Blowers should not be installed close to
sources of direct heat exceeding 180° F (55° C).
-
MSRP
-
$202.04
-
U/M
-
/ EA
-
Price
-
$171.73
-
Core
-
-
Part Number
-
35515-0010
-
Manufacturer
-
Website Jabsco
-
Brand
-
-
ETA
-
-
Quantity Available
-
3
-
Quantity On Order
-
