3" Flange-Mount Blower - 115 VAC
High-Output AC Blower with 1000-Hour Motor Life
This AC blower for high-volume air intake or extraction are designed for intermittent duty in galleys, bilges, accommodation and head compartments. They are suitable for general air circulation when 115 VAC power consumption is preferred.
The flange-mount blower is of a radial design that produces the highest output in more complex installations with longer ducting lengths and/or multiple bends in the ducting. They are generally mounted directly onto a flat bulkhead using a mounting collar to connect to the discharge ducting. This allows a very neat installation on an engine room bulkhead.
Jabsco AC blower is not designed to remove fumes from the engine compartments of gasoline-powered boats prior to start-up and do not conform to ISO 8846 MARINE and USCG Regulations for ignition protection. Note: Only DC models of this blower meet the ignition-protection regulatory specifications.
Features:
- Outlet flange mounts directly on bulkhead
- Tough reinforced-plastic housing
- Mounts to any surface
- Slip-On inlet and outlet ducting connection
- Efficient high-volume air flow
- Low current draw
- Dimensionally stable, quiet-running Delrin® rotors
- Corrosion-resistant material construction
- N.M.M.A. type accepted
- CE approved
Mfg No. 34744-0000
Duct Size 3" (75mm)
Maximum Output 100 CFM* (2.8m3/min)
ISO 11105 Rated Compartment Size 55-65 Cubic Ft (1.4 -
2.0m3)
Dimensions (L x W x H) 7-1/8" x 6-3/4" x 7-7/8" (181 x 171 x 200mm)
Voltage / Fuse Size 115 VAC 0.75 Amp
* CFM - Cubic Feet per Minute
Note: This standard-duty Jabsco blowers are primarily intended for intermittent-duty cycles, such as evacuating fuel vapors from bilge areas - 15 minutes maximum. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.
Only the heavy-duty blowers are designed for continuous-duty operation in commercial or heavy-use applications.
Note also: Blowers should not be installed close to sources of direct heat exceeding 180° F (55° C).
-
MSRP
-
$311.48
-
U/M
-
/ EA
-
Price
-
$264.76
-
Core
-
-
Part Number
-
34744-0000
-
Manufacturer
-
Website Jabsco
-
Brand
-
-
ETA
-
-
Quantity Available
-
4
-
Quantity On Order
-
